Network Setup for UMA Calling

After getting the Blackberry Bold 2 (9700) on T-Mobile I was anxious to try out the UMA voice feature. My WIFI network at the house consists of apple devices, the airport extreme and express. After struggling to get a UMA connection working on my existing network, I found out from several web postings that there are compatibility issues between apple wireless network devices and UMA connections. There could be a solution as of this blog post but I gave up looking for one.

I also found out that T-Mobile was giving away a D-Link wireless router model # TM-G240 at their stores for 1 cent. This router is one of their recommended devices for UMA calling. I picked one up and tried to figure out how to integrate it into our home network.

Our home network consists of dual WAN connections, a DSL line and a Cable line. We have this set up for redundancy and load balancing. I use a Xincom dual WAN router to take in both the DSL and Cable connections and feed the local network consisting of a mix of wired and wireless devices.

Here is a scratch diagram of the current network setup. (I apologize, I do not have MS Visio or any other tools to create visually appealing diagrams at the time of this post)

Current Network Setup

Current Network Setup
Current Network Setup

I tried creating a separate wireless network with the new D-Link router from T-Mobile within my LAN but was still not able to establish a UMA connection. I was able to connect to the Blackberry Infrastructure and the device showed a UMA network was available however not connected. The following error code was displayed.

W006.1 – ISP or T-Mobile network error.

To view the UMA connection status, perform the following steps on your bold 2 device

Manage Connections > Wi-FI Options > Select Connection > Wi-Fi Tools > WI-Fi Diagnosis

A quick search on Google showed what the different error codes mean.
http://www.blackberryfaq.com/index.php/Wifi_/_UMA_Error_Codes

I knew that the likely culprit would be my IPSec settings on my gateway device, the Xincom router. If you have ever tried changing settings on this device you know how complicated it can get and there is not much manufacturer or forum support out there. It is a very robust device though. I tried making a few changes to no avail and did not want to change additional settings and break something else so I considered an alternate way of connecting the D-Link router and still maintain dual WAN connectivity for most of my network.

I moved the D-Link router from behind the Xicom device to right after the DSL modem and used the D-Link to establish the PPPOE connection, provide a secondary Wi-Fi connection and provide a LAN IP address which serves as the main IP for the secondary WAN connection on the Xincom device. Using this set up, the Blackberry devices with UMA can connect to the new Wi-Fi network and by being directly connected to the internet, the D-Link wireless router was then able to allow UMA calling.

Having successfully set up the UMA calling with a router connected to the internet, I begun to question the apple wireless compatibility issues. When I get time I will try and connect the both the apple devices directly to the internet, bypassing the Xincom router and see if that set up works.

New Network Setup

New Network Setup
New Network Setup